851df86aba
There were two problems here:
1. The docs indicated that this should be a dual-BOOM and
single-Rocket config, but the config actually had two Rocket
cores.
2. Since the doc include string was 'DualBoomAndRocket', it was
accidentally matching against the 'DualBoomAndRocketOneHwacha'
section, which comes first in the file.
So, I created a new 'DualLargeBoomAndSingleRocketConfig' config which
only has one Rocket core, and changed the doc include string to
'DualBoomAndSingleRocket'.
62 lines
3.5 KiB
ReStructuredText
62 lines
3.5 KiB
ReStructuredText
.. _hetero_socs_:
|
|
|
|
Heterogeneous SoCs
|
|
===============================
|
|
|
|
The Chipyard framework involves multiple cores and accelerators that can be composed in arbitrary ways.
|
|
This discussion will focus on how you combine Rocket, BOOM and Hwacha in particular ways to create a unique SoC.
|
|
|
|
Creating a Rocket and BOOM System
|
|
-------------------------------------------
|
|
|
|
Instantiating an SoC with Rocket and BOOM cores is all done with the configuration system and two specific config fragments.
|
|
Both BOOM and Rocket have config fragments labelled ``WithN{Small|Medium|Large|etc.}BoomCores(X)`` and ``WithNBigCores(X)`` that automatically create ``X`` copies of the core/tile [1]_.
|
|
When used together you can create a heterogeneous system.
|
|
|
|
The following example shows a dual core BOOM with a single core Rocket.
|
|
|
|
.. literalinclude:: ../../generators/chipyard/src/main/scala/config/HeteroConfigs.scala
|
|
:language: scala
|
|
:start-after: DOC include start: DualBoomAndSingleRocket
|
|
:end-before: DOC include end: DualBoomAndSingleRocket
|
|
|
|
|
|
Adding Hwachas
|
|
-------------------------------------------
|
|
|
|
Adding a Hwacha accelerator is as easy as adding the ``DefaultHwachaConfig`` so that it can setup the Hwacha parameters and add itself to the ``BuildRoCC`` parameter.
|
|
An example of adding a Hwacha to all tiles in the system is below.
|
|
|
|
.. literalinclude:: ../../generators/chipyard/src/main/scala/config/HeteroConfigs.scala
|
|
:language: scala
|
|
:start-after: DOC include start: BoomAndRocketWithHwacha
|
|
:end-before: DOC include end: BoomAndRocketWithHwacha
|
|
|
|
In this example, Hwachas are added to both BOOM tiles and to the Rocket tile.
|
|
All with the same Hwacha parameters.
|
|
|
|
Assigning Accelerators to Specific Tiles with MultiRoCC
|
|
-------------------------------------------------------
|
|
|
|
Located in ``generators/chipyard/src/main/scala/ConfigFragments.scala`` is a config fragment that provides support for adding RoCC accelerators to specific tiles in your SoC.
|
|
Named ``MultiRoCCKey``, this key allows you to attach RoCC accelerators based on the ``hartId`` of the tile.
|
|
For example, using this allows you to create a 8 tile system with a RoCC accelerator on only a subset of the tiles.
|
|
An example is shown below with two BOOM cores, and one Rocket tile with a RoCC accelerator (Hwacha) attached.
|
|
|
|
.. literalinclude:: ../../generators/chipyard/src/main/scala/config/HeteroConfigs.scala
|
|
:language: scala
|
|
:start-after: DOC include start: DualBoomAndRocketOneHwacha
|
|
:end-before: DOC include end: DualBoomAndRocketOneHwacha
|
|
|
|
The ``WithMultiRoCCHwacha`` config fragment assigns a Hwacha accelerator to a particular ``hartId`` (in this case, the ``hartId`` of ``2`` corresponds to the Rocket core).
|
|
Finally, the ``WithMultiRoCC`` config fragment is called.
|
|
This config fragment sets the ``BuildRoCC`` key to use the ``MultiRoCCKey`` instead of the default.
|
|
This must be used after all the RoCC parameters are set because it needs to override the ``BuildRoCC`` parameter.
|
|
If this is used earlier in the configuration sequence, then MultiRoCC does not work.
|
|
|
|
This config fragment can be changed to put more accelerators on more cores by changing the arguments to cover more ``hartId``'s (i.e. ``WithMultiRoCCHwacha(0,1,3,6,...)``).
|
|
|
|
|
|
.. [1] Note, in this section "core" and "tile" are used interchangeably but there is subtle distinction between a "core" and "tile" ("tile" contains a "core", L1D/I$, PTW).
|
|
For many places in the documentation, we usually use "core" to mean "tile" (doesn't make a large difference but worth the mention).
|