Merge remote-tracking branch 'origin/main' into tetheredsim

CHANGELOG.md

@@ -2,6 +2,89 @@
 
 This changelog follows the format defined here: https://keepachangelog.com/en/1.0.0/
 
+## [1.10.0] - 2023-6-16
+
+Adds superscalar in-order core, prefetchers, architectural checkpointing, examples for custom-chiptop/tapeout-chip/flat-chiptop. FireSim bumped with new local FPGA support: Xilinx VCU118 (w/XDMA), Xilinx Alveo U250/U280 (w/XDMA, in addition to previous Vitis support), RHSResearch NiteFury II (w/XDMA). FireSim now also supports Xcelium for metasims.
+
+### Added
+* QoL improvement to IOBinders + custom ChipTop example by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1399
+* New Scala-based Config Finder by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1424
+* ADD: improve Makefile in tests/, add explicit arch flags by @T-K-233 in https://github.com/ucb-bar/chipyard/pull/1439
+* Add mt-helloworld example by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1428
+* Add tutorial software by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1447
+* Support not instantiating the TileClockGater/ResetSetter PRCI control by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1459
+* ELF-based-loadmem | architectural restartable checkpoints by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1438
+* Add embench build support by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1479
+* Support multi-run of binaries by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1480
+* Integrate barf (prefetchers) by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1505
+* Add higher level explanations of RoCC + more resources by @nikhiljha in https://github.com/ucb-bar/chipyard/pull/1486
+* Support banked/partitioned scratchpads by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1431
+* Add dual-issue in-order "shuttle" core by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1495
+* Improve peripheral fragments to include more peripheral devices and support instantiating multiple instances of same device by @T-K-233 in https://github.com/ucb-bar/chipyard/pull/1511
+
+### Changed
+* Bump to latest rocket-chip/chisel3.5.6 by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1411
+* Resolve merge conflicts in chisel3.5.6 bump by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1430
+* PLL integration example + FlatChipTop/TestHarness by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1427
+* bump testchipip by @joey0320 in https://github.com/ucb-bar/chipyard/pull/1434
+* Fix ChipLikeQuadRocketConfig crossing by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1436
+* Bump TestChipIp to improve default serial_tl behavior by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1435
+* Bump testchipip to standardize TL serdesser bundle params by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1446
+* Bump to Hammer 1.1.1 by @harrisonliew in https://github.com/ucb-bar/chipyard/pull/1451
+* Always initialize fpga-shells with init-submodules.sh by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1456
+* Support uni-directional TLSerdesser by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1476
+* Move xcelium.mk out of top-level by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1482
+* Set default config back to 1-channel by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1483
+* Unify supernode/harness-clocking across chipyard/firesim/fpga by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1474
+* Use fat jar's to remove SBT invocations by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1375
+* Bump to latest rocket-chip by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1475
+* Improvements to chipyard clocking by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1489
+* Downgrade cryptography | Pin linux sysroot by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1494
+* bump mempress by @joey0320 in https://github.com/ucb-bar/chipyard/pull/1498
+* bump sha3 by @joey0320 in https://github.com/ucb-bar/chipyard/pull/1499
+* Bump FireMarshal by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1502
+* Split NVDLA config out of ManyMMIOAccels config to reduce CI load by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1503
+* Ignore barstools compilation if not needed by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1504
+* Disable NVDLA simulations in CI by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1507
+* Update NoC example config to match new PRCI organization by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1509
+* Bump gemmini by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1519
+
+### Fixed
+* Various improvements and fixes by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1420
+* Ensure conda cleanup regex properly filters out non-numeric chars by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1425
+* Clear screen on prompt by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1449
+* misc: many fixes to cospike by @tianrui-wei in https://github.com/ucb-bar/chipyard/pull/1450
+* Uniquify module names that are common to Top & Model by @joey0320 in https://github.com/ucb-bar/chipyard/pull/1442
+* Use pk/encoding.h for hello/mt-hello by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1454
+* Fix no-uart configs by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1457
+* Fix support for no-bootROM systems by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1458
+* Check that HarnessClockInstantiator doesn't receive requests for similarly-named-clocks with different frequencies by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1460
+* uniquify module names by @joey0320 in https://github.com/ucb-bar/chipyard/pull/1452
+* Flip serial_tl_clock to be generated off-chip by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1445
+* Move TestHarness to chipyard.harness, make chipyard/harness directory by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1463
+* Separate out conda-lock generation into new script by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1466
+* Bump DRAMSim2 to avoid verbose log files by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1468
+* Bump Verilator and use `TestDriver.v` as top by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1398
+* Add 1GB / 4GB DRAM firechip configs for FireSim VCU118 by @sagark in https://github.com/ucb-bar/chipyard/pull/1471
+* Rename SerialAdapter+SimSerial to TSIToTileLink/SimTSI/TSIHarness by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1465
+* Make BootAddrReg optional by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1464
+* Fix vcd/fst/fsdb waveform generation by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1473
+* Switch RTL sims to absolute clock-generators by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1472
+* Generate objdump | check BINARY | cospike fixes by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1467
+* Small QOL fixes for Xcelium by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1485
+* (VCU118 DDR HarnessBinder)Fix data field width mismatch between DDR AXI and TileLink MemoryBus  by @jerryhethatday in https://github.com/ucb-bar/chipyard/pull/1487
+* Force conda-lock to v1 by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1492
+* Loosen/tighten conda requirements | Fix conda-lock req by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1497
+* Misc Makefile Fixes by @abejgonzalez in https://github.com/ucb-bar/chipyard/pull/1496
+* Bump constellation to fix interconnect FIFO-fixers by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1510
+* [ci skip] Fix broken docs link by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1515
+* Revert changes to peripheral fragments by @jerryz123 in https://github.com/ucb-bar/chipyard/pull/1518
+
+### New Contributors
+* @tianrui-wei made their first contribution in https://github.com/ucb-bar/chipyard/pull/1450
+* @jerryhethatday made their first contribution in https://github.com/ucb-bar/chipyard/pull/1487
+* @nikhiljha made their first contribution in https://github.com/ucb-bar/chipyard/pull/1486
+
 ## [1.9.1] - 2023-04-21
 
 Various fixes for Linux boot, More Chip/bringup examples, Chisel 3.5.6 bump

docs/Simulation/FPGA-Accelerated-Simulation.rst

@@ -26,9 +26,9 @@ Finally, source the following environment at the root of the FireSim directory:
 
     cd sims/firesim
     # (Recommended) The default manager environment (includes env.sh)
-    source sourceme-f1-manager.sh
+    source sourceme-manager.sh
 
-.. Note:: Every time you want to use FireSim with a fresh shell, you must source this ``sourceme-f1-manager.sh``
+.. Note:: Every time you want to use FireSim with a fresh shell, you must source ``sourceme-manager.sh``
 
 At this point you're ready to use FireSim with Chipyard. If you're not already
 familiar with FireSim, please return to the :fsim_doc:`FireSim Docs <Initial-Setup/Setting-up-your-Manager-Instance.html#completing-setup-using-the-manager>`,

scripts/build-setup.sh

@@ -178,7 +178,7 @@ if run_step "6"; then
         pushd $CYDIR/sims/firesim
         (
             echo $CYDIR
-            source sourceme-f1-manager.sh --skip-ssh-setup
+            source sourceme-manager.sh --skip-ssh-setup
             pushd sim
             make sbt SBT_COMMAND="project {file:$CYDIR}firechip; compile" TARGET_PROJECT=firesim
             popd

vlsi/example-asap7.yml

@@ -17,7 +17,7 @@ vlsi.inputs.power_spec_type: "cpf"
 
 # Specify clock signals
 vlsi.inputs.clocks: [
-  {name: "clock_clock", period: "1ns", uncertainty: "0.1ns"}
+  {name: "clock_uncore_clock", period: "1ns", uncertainty: "0.1ns"}
 ]
 
 # Generate Make include to aid in flow

vlsi/example-design.yml

@@ -10,7 +10,7 @@ vlsi.inputs.power_spec_type: "cpf"
 
 # Specify clock signals
 vlsi.inputs.clocks: [
-  {name: "clock_clock", period: "2ns", uncertainty: "0.1ns"}
+  {name: "clock_uncore_clock", period: "2ns", uncertainty: "0.1ns"}
 ]
 
 # Specify pin properties

vlsi/example-designs/sky130-commercial.yml

@@ -2,7 +2,7 @@
 
 # Specify clock signals
 vlsi.inputs.clocks: [
-  {name: "clock_clock", period: "30ns", uncertainty: "2ns"}
+  {name: "clock_uncore_clock", period: "30ns", uncertainty: "2ns"}
 ]
 
 # Placement Constraints
@@ -16,4 +16,4 @@ vlsi.inputs.clocks: [
 #     - path: "ChipTop"
 #       ...
 #       margins:
-#         right: 0  # or left: 0
+#         right: 0  # or left: 0

vlsi/example-designs/sky130-openroad-rockettile.yml

@@ -1,7 +1,7 @@
 # Override configurations in ../example-sky130.yml and example-designs
 
 # Specify clock signals
-# Rocket/RocketTile names clock signal "clock" instead of "clock_clock"
+# Rocket/RocketTile names clock signal "clock" instead of "clock_uncore_clock"
 vlsi.inputs.clocks: [
   {name: "clock", period: "30ns", uncertainty: "3ns"}
 ]

vlsi/example-designs/sky130-openroad.yml

@@ -3,7 +3,7 @@
 # Specify clock signals
 # Relax the clock period for OpenROAD to meet timing
 vlsi.inputs.clocks: [
-  {name: "clock_clock", period: "50ns", uncertainty: "2ns"}
+  {name: "clock_uncore_clock", period: "50ns", uncertainty: "2ns"}
 ]
 
 # Flow parameters that yield a routable design with reasonable timing

vlsi/example-designs/sky130-rocket.yml

@@ -1,7 +1,7 @@
 # Override configurations in ../example-sky130.yml and example-designs
 
 # Specify clock signals
-# Rocket/RocketTile names clock signal "clock" instead of "clock_clock"
+# Rocket/RocketTile names clock signal "clock" instead of "clock_uncore_clock"
 vlsi.inputs.clocks: [
   {name: "clock", period: "5ns", uncertainty: "1ns"}
 ]

vlsi/example-sky130.yml

@@ -20,7 +20,7 @@ vlsi.inputs.power_spec_type: "cpf"
 
 # Specify clock signals
 vlsi.inputs.clocks: [
-  {name: "clock_clock", period: "20ns", uncertainty: "1ns"}
+  {name: "clock_uncore_clock", period: "20ns", uncertainty: "1ns"}
 ]
 
 # Generate Make include to aid in flow

vlsi/sim.mk

@@ -21,7 +21,7 @@ $(SIM_CONF): $(sim_common_files) check-binary
 	done
 	echo "  options_meta: 'append'" >> $@
 	echo "  defines:" >> $@
-	for x in $(subst +define+,,$(PREPROC_DEFINES)); do \
+	for x in $(subst +define+,,$(SIM_PREPROC_DEFINES)); do \
 		echo '    - "'$$x'"' >> $@; \
 	done
 	echo "  defines_meta: 'append'" >> $@
@@ -75,7 +75,7 @@ $(SIM_TIMING_CONF): $(sim_common_files)
 	echo "sim.inputs:" > $@
 	echo "  defines: ['NTC']" >> $@
 	echo "  defines_meta: 'append'" >> $@
-	echo "  timing_annotated: 'true'" >> $@
+	echo "  timing_annotated: true" >> $@
 
 # Update hammer top-level sim targets to include our generated sim configs
 redo-sim-rtl: $(SIM_CONF)